RSD Liquid Instructions:


Surface Preparation:
Warning: Surface to be adhered to must be scrupulously clean!!

Remove dust, dirt, oil, grease, rust. mold-release agent, etc., from the surface.
For Smooth Surfaces abrade the surface by

wire-brushing, sandblasting, abrasive paper, etc.,
followed by degreasing solvent to wipe the surface.
Mix RSD compound thoroughly, RSD is shipped at proper spraying viscosity. For thinner consistency, use a very small amount of water.

spray equipment:

5:1 ratio Graco Pumps 225-837 or 225-575 suitable for use in 5 gallon pail. Powerflo gun 204-000 with 1/4" round nozzle and 3/4" I.D. hose. Atomizing pressure: 40-50 psi.
Gun, feed lines, and pump should be thoroughly cleaned after each use: in between uses, immerse gun in water.

Vinyl based paints are compatible with material, and is required to change color and protect material from long term exposure to water erosion.

RSD Comes in 1 Gallon or 5 Gallon Pails.

Excellent Damping:
1.5 to 1 ratio

Good Damping:
1 to 1 ratio

Beige (off white) Properties-Dry


liquid data sheet


Industry Members:

R-BLOX Sound Control, Inc is a Proud member or sponsors of the following professional Associations and very satisfied with their services.

sound deadener usaci membersema member sound deadenermember sound deadener installers challenge sponsormecca sound deadener member r-bloxmecca sound deadener member r-blox


Dealers feel free to call or email to get your free!! Dealer Pack

home// contact// products// testimonials// find a dealer// online store//

data sheets// glossary// logos// team r-blox// events// installs// applications

installations instructions// about us// definitions//